F-tone Networks 4K HDMI fiber to video/audio/data is composed of the transmitter and the receiver. The video, audio and data output from the computer host (HD video signal source, HD DVD/DVR and other devices) are extended to the remote user through one core optical fiber, and the image and sound of the computer host are broadcasted in real time at the remote end.
Features
● Maximum support 4096*2160@30Hz downward compatibility
● Support international standard HDCP 1.4
● EDID transparent transmission mode
● Support RGB4:4:4 YUV4:4:4 4:2:2 4:2:0
● Support DDC CEC HPD signal
● Support 4K HDMI video with loop-out
● Support KVM function (keyboard and mouse)
● Support 1 channel reverse IR infrared transmission (optional)
● Support 1 channel bidirectional independent 3.5 stereo audio, forward support audio embedding / unembedding function
● Support 1 channel bidirectional full-duplex RS232 (optional half-duplex RS485)
● 1 channel reverse contact closure function (optional)
● Single-fiber/dual-fiber (optional)
● Single mode / multi-mode compatibility, multi-mode transmission distance of 1KM, single-mode transmission distance of 10KM
● Delay < 2 ms
● Support hot swap signal, plug and play, no setting required
Technical Indexes
| Fiber index |
| Wavelength | 1310-1550nm |
| Bit rate | 10Gbps |
| Tx power | ＞-5db |
| Rx sensitivity | ＞-14db |
| Fiber connector | LC |
| Video index |
| Video bandwidth | 10Gbps |
| Maximum resolution | 4096*2160@30Hz downward compatibility |
| Maximum pixel clock | 297MHZ |
| Effective cable length | 10M |
| Physical interface | HDMI female |
| KVM(USB) index |
| Version | 1.1 |
| Tx physical interface | USB female type B |
| Rx physical interface | USB female type A |
| Audio index |
| Sampling frequency | 48K |
| Sampling depth | 24bit |
| Dynamic bandwidth | 96db |
| Total harmonical distortion (THD) | -88db |
|
Signal to noise ratio（SNR）
| 96db |
| Audio input/output impedance | 600Ω |
| Signal level | VPP 3.5V |
| Physical interface | 3.5mm stereo audio socket |
| Signal type | stereo audio |
| IR index |
| Parameter | Min | Type | Max | Unit | Condition |
| Optical current | 200 | - | 1030 | ｕA | IF=4mA,VCE=3.5V |
| Peak wavelength | - | 940 | - | nm | 1F=20mA |
| Spectrum voltage | - | 80 | - | nm | 1F=20mA |
| View angle | - | ±30 | - | Deg | 1F=20mA |
| Forward voltage | - | 1.2 | 1.6 | V | 1F=20mA |
| Reverse current | - | - | 10 | ｕA | VR=5V |
| RS232 (3-wire system, full duplex) index |
| Baud rate | 256000Hz downward compatibility |
| Data bits | 8 digits |
| Physical interface | 3-pin phoenix terminal |
| RS 485 (2-wire system, half duplex) index |
| Error rate | <10^-9 |
| Bit rate | 0-400Kbps |
| Physical interface | 3-pin phoenix terminal |
| Contact closure index |
| Input electrical parameters | Dry node, not charged (short or disconnected) |
| Output electrical parameters | Dry node, not charged (short or disconnected) |
| Output relay maximum switching voltage | 250VAC/220VDC |
| Output relay maximum switching current | 2A |
| Mechanical durability of output relay | 100,000,000times |
| Maximum output power of relay | 60W |
| Physical interface | 2-pin phoenix terminal (transmitter) Switch button (receiver) |
| Other index |
| Operating temperature | -20°C ~75°C |
| Storage temperature | -40°C ~85°C |
| Power supply | 12V1A |
| Power dissipation | ＜1.5W |
注：本產(chǎn)品有全國產(chǎn)化型號(hào)可選
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
會(huì)員1.png)
