P30H is a transducer which was designed to photovoltaic , battery, telecommunication and railway installations. P30H measures and records current, voltage, power, energy and other d.c. circuit parameters.

P30H是一種轉換器，設計為光伏、電池、電信和鐵路裝置。P30H測量和記錄電流、電壓、功率、能量和其他直流電路參數。

The output signal is galvanically isolated from the input signal and the power supply.
P30H has programmable measurement and additional functions.
Programming parameters can be realized with the use of buttons, via RS-485 interface and free e-con software or Ethernet or any web browsers (see how it works: login – user, password – pass).

輸出信號從輸入信號和電源中進行電流隔離。

P30H具有可編程測量和附加功能。

編程參數可以通過使用按鈕來實現，通過RS-485接口和免費的e-con軟件或以太網或任何web瀏覽器(參見它是如何工作的:登錄用戶、密碼通過)。

產品資料：

p30h

p30h_usermanual

Features

·         basic,

·         with SD/SDHC card,

·         with Ethernet and internal file system memory.Transducer is available in 3 versions:

Features and functions:

·         Programmable input

·         DC parameters

·         current via shunts +/- 150mV

·         voltage 0…12/48/100/250V or 0…600/1000V with additional resistor

·          Output:

·         1 x analog 0/4…20mA or 0…10V

·         1 x relay, optionally changeable to 0/4…20mA or 0…10V analog output

·         1 x additional relay, optionally changeable to 0…24V d.c. supply output

·         LCD 2 x 8 characters with LED backlight

·         Supply: 85..253 V a.c./d.c. or 20…40 V a.c./d.c., / 20…60 V d.c.

·         Conversion of measured values into an output signal on the base of the individual linear characteristic

·         1 or 2 alarm relays with NO contact operating in 6 modes

·         Additional supplying output 24 V d.c 30 mA switched-on/switched-off (option).

·         Recording of input signals in internal file, on SD/SDHC card (option) or internal file system memory (option).

·         Interface RS-485 Modbus RTU.

·         RS-485 Master/Monitor mode – possibility to poll 1 device.

·         SD/SDHC support (option).

·         Interface Ethernet 10/100 BASE-T (option).

·         Protocol: Modbus TCP/IP, HTTP, FTP.

·         Services: www server, ft p server, client DHCP

·         Dimension: 45 x 120 x 100mm

特性

·         基礎,

·         與SD / SDHC卡,

·         使用以太網和內部文件系統內存。換能器有三個版本:

·         特性和功能:

·         可編程輸入

·         直流參數

·         電流通過分流+/- 150mV。

·         電壓0…12/48/100/250V或0…600/1000V與額外的電阻

·         輸出:

·         1 x模擬0/4…20 ma或0…10 v

·         1 x繼電器,可選的0/4…20 ma或0…10 v模擬輸出

·         1 x額外的繼電器,可選的為0…24 v。供應輸出

·         液晶顯示器2 x 8字，LED背光。

·         提供:85 . .253 V交流/直流電。或20…40 V交流/直流電。/ 20…60 V。

·         在單個線性特性的基礎上，將測量值轉換為輸出信號。

·         ?1或2個報警繼電器，6種模式無接觸操作。

·         ?附加供應輸出24 V d。c 30 mA開關-on/切斷(選項)。

·         ?在內部文件中記錄輸入信號，SD/SDHC卡(選項)或內部文件系統內存(選項)。

·         ?接口RS-485 Modbus RTU。

·         ?rs -485主/監視器模式-可能的poll 1設備。

·         ?支持sd / SDHC(選項)。

·         ?接口以太網10/100 BASE-T(選項)。

·         ?協議:Modbus TCP/IP, HTTP, FTP。

·         ?服務:www服務器，ft p server，客戶DHCP。

·         ?尺寸:45 x 120 x 100mm。