功能特點
Bimetallic switch O
Area of Application
The thermo switch O is used whenever switch-on function is needed, caused by overheating or increasing temperature. Specific applications include: cooling fan, alarm signal, controller, timer.
Mounting brackets or clips available.
Function
The thermo switch O operates not current sensitive. Temperature detection is realized by a bimetal snapdisc. When the switch-on temperature TE is reached, the bimetal disk will snap over to close a contact system. After cooling down and reaching the cut-off temperature TA, the bimetal disk will automatically return to its initial position and open the contacts again.
Area of Application
The thermo switch O is used whenever switch-on function is needed, caused by overheating or increasing temperature. Specific applications include: cooling fan, alarm signal, controller, timer.
Mounting brackets or clips available.
Function
The thermo switch O operates not current sensitive. Temperature detection is realized by a bimetal snapdisc. When the switch-on temperature TE is reached, the bimetal disk will snap over to close a contact system. After cooling down and reaching the cut-off temperature TA, the bimetal disk will automatically return to its initial position and open the contacts again.
規格尺寸 
技術參數
| Breaking capacity: | 250 V; 1,0 A / 50 Hz |
| Min. current: | 20 mA |
| Switching temperature: | 50°C – 130°C (±10) in 5 Kelvin steps |
| Switching differential: | 10 K to 60 K depending from switch on temperature |
| max. ambient temperature: | 160°C / 200°C, 1 minute |
| Approvals: | VDE (EN 60730), conform to RoHS |
德國勒密拖 Limitor GmbH 品牌介紹
Limitor GmbH 是一家定時開關、 溫度傳感器、 溫度保險絲、 溫度開關、 溫度限制器、 絕緣套管、 限流器的德國制造商，始于1979年。勒密拖 Limitor GmbH的高溫、超高溫領域的溫度開關熱保護產品處于水平。
